Phison Ps2251-07-ps2307- Mptool | QUICK |

This temporarily overrides the controller's memory and forces the drive into a bootable state that the PC can detect:

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Serial NAND not supported | Uncheck "Use Serial Number" in Other Settings. | | 0x1105 | Boot code corruption | Short pins 29/30 to force boot mode. | | 0x1084 | Power cycle required | Physically unplug and replug the drive. | | 0x0010 | Flash ID mismatch | Your drive isn't PS2251-07; double-check ChipGenius. | | Red "Timeout" | Bad USB cable/port | Use rear motherboard USB 2.0 port. | phison ps2251-07-ps2307- mptool

Phison ST-TOOL V3.81.12_2021.06.18_TW (PS2251-70 - USBDev.ru | | 0x0010 | Flash ID mismatch |

Before downloading any flashing software, you must verify that your USB drive specifically uses the PS2251-07 / PS2307 chip. Using the wrong tool can permanently destroy the hardware. Using the wrong tool can permanently destroy the hardware

: Phison MPALL (v3.72 or v3.80 onwards) optimized for PS2251-07.

The actual operating instructions permanentized to the controller. 2. Essential Diagnostics