Sinotimer Svp-916 Manual Pdf !!top!! Jun 2026

The device simultaneously shows real-time Voltage and Current readings.

To enter the programming mode, . Press "Set" sequentially to cycle through the parameters (P1 to P7). Use the ▲ and ▼ keys to adjust the numerical values. Parameter Code Description Adjustable Range Factory Default Value P1 Over-voltage Protection Threshold 221V – 300V (or OFF) P2 Over-voltage Recovery Threshold 220V – 299V P3 Over-voltage Protection Action Time 0.1s – 10s P4 Under-voltage Protection Threshold 150V – 219V (or OFF) P5 Under-voltage Recovery Threshold 151V – 220V P6 Under-voltage Protection Action Time 0.1s – 10s P7 Over-current Protection Threshold 1A – 40A/63A/80A (Model Dep.) Model Maximum P8 Fault Recovery & Boot Delay Time 2s – 512s

Run the main incoming Phase/Live wire to the IN L terminal. Run the main incoming Neutral wire to the IN N terminal. Sinotimer Svp-916 Manual Pdf

The Sinotimer SVP-916 is a micro-processor based time switch designed to control the opening and closing of electrical circuits based on a pre-set schedule. Commonly used for street lighting, irrigation systems, water heaters, and neon signs, the device replaces traditional mechanical timers with higher precision and the ability to program multiple specific on/off events.

150V–219V (Default: 160V)

221V to 300V (Default: 280V).

Yes. When programming the parameters for over-voltage ( U1 ), under-voltage ( U5 ), or over-current ( U9 ), you can scroll the value all the way up or down past its limit using the arrows until the display reads OFF . Use the ▲ and ▼ keys to adjust the numerical values

The grid voltage has exceeded the threshold or dropped below U4 .