Omron M4 Hem 722c1 E Manual -

| Display / Problem | Possible Cause | Solution | | :--- | :--- | :--- | | or Cuff does not inflate. | The START/STOP button was pressed before the cuff was properly placed; or the air plug is not fully inserted into the monitor. | Press the START/STOP button to turn the monitor off. Firmly insert the air plug and place the cuff correctly, then press START/STOP again. | | E2 | Movement or talking during measurement; or the cuff is not properly positioned, causing a slow air leak. | Remain still and do not speak during the entire measurement. If 'E2' persists, you may need to manually inflate the cuff to 30-40 mmHg above your expected systolic pressure. | | E3 | The cuff has been inflated to a pressure exceeding 299 mmHg. | Do not touch the cuff or bend the air tube during measurement. To manually inflate for a measurement, refer to the manual for instructions. | | E4 or Er | Excessive body movement, talking, or vibrations during the measurement. | Press the START/STOP button to turn the monitor off. Wait 2-3 minutes, then take a new measurement, ensuring you remain still and silent. | | Blinking Heart Symbol | An irregular heartbeat was detected two or more times during the measurement. | An irregular heartbeat is a finding you may wish to share with your healthcare provider. The device will still display a blood pressure reading. | | Monitor inflates to a very low pressure (e.g., 130 mmHg) and stops. | The IntelliSense technology may have detected a low systolic pressure from a previous reading. | If this occurs and you feel a higher reading is necessary, you can manually inflate the cuff. First, check that your batteries are fresh. | | E1 (Continuous) | The air tube connector plug is loose or disconnected. | Turn off the monitor, firmly reconnect the air plug into the socket on the side of the monitor, and restart the measurement. |

For further information on the Omron M4 HEM 722C1 E, refer to the following resources: Omron m4 hem 722c1 e manual

The Omron M4 HEM-722C1-E is designed to support up to two users. Before using memory functions, select your user ID. Each user’s readings are stored separately, allowing two people to track their blood pressure independently without mixing data. | Display / Problem | Possible Cause |