Some RaySharp boards have two pins labeled G1 . Use a conductive tool (like a screwdriver) to short these two pins together while booting the DVR .
Resetting a RaySharp DVR password does not require a $200 technician visit. Using the methods outlined above—starting with the hidden backdoor, progressing to the jumper reset, and finishing with the serial console—you can restore your security system in under 30 minutes.
DVRs without email setup.
Like a desktop computer, a RaySharp DVR relies on a small CR2032 silver coin-cell battery on the motherboard to retain its internal system clock and temporary user settings when unplugged. Removing this battery forces the system time back to zero, which can clear temporary locks or force the supercode date back to a predictable default. Steps to Perform a Battery Reset: Power down the DVR and open the metal casing. Locate the silver slot on the motherboard.
