| Error Code | Fault Description | Most Common Causes & Solutions | | :--- | :--- | :--- | | | Temperature Sensor Fault | The NTC thermistor has failed. Often due to limescale buildup. Try descaling the machine. If the code persists, the sensor or its wiring may need replacement. | | F2 / E02 | Door Lock Fault | The door is not properly closed, or the door interlock mechanism is faulty. Ensure no clothing is caught in the door seal and close it firmly. If it still won't start, the interlock may need replacing. | | F3 | Slow Water Intake | The machine failed to reach the correct water level in time. Check that the water supply tap is fully open, the inlet hose isn't kinked, and the inlet valve filter isn't clogged. | | F7 / E03 | Drainage Problem | The machine is unable to drain water. This is almost always due to a blocked drain pump filter . Clean the filter immediately to prevent further issues. | | E04 | Motor Overload | The motor is experiencing an overload, often due to an unbalanced load. The machine will pause to protect the motor. Redistribute the laundry and try again. | | E05 | Unbalanced Load | Excessive vibration during the spin cycle. The machine will try to rebalance the load. Avoid washing single heavy items like a bathrobe or duvet alone. | | E06 | Temperature Sensor Error | A problem with the temperature sensor, which affects the machine's ability to control water temperature across different cycles. | | E08 | Detergent Dispenser Fault | The detergent dispenser drawer is malfunctioning, often due to clogging from using the wrong type of detergent. Clean the drawer thoroughly. |
Before diving into operation, it helps to understand the core capabilities of your hardware: 5 kg (dry laundry) Maximum Spin Speed: 500 RPM (Revolutions Per Minute) gorenje wa 50050 manual updated
Optimized eco-system for standard cotton cycles 🕹️ Control Panel & Everyday Operation | Error Code | Fault Description | Most
Includes basic error reporting via blinking LED patterns or display codes if equipped (e.g., F3 for water supply issues, F8 for motor speed malfunctions). Common Maintenance & Troubleshooting If the code persists, the sensor or its
Rotates clockwise to select the wash program and temperature.