| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Overload — Weight exceeds maximum capacity (usually 400 lb or 180 kg). | Remove weight immediately to prevent sensor damage. Use a scale with higher capacity. | | Lo | Low battery. | Replace all three AAA batteries simultaneously. Do not mix old and new. | | UnSt | Unstable weight — You are moving or scale is on a soft surface. | Stand still. Move scale to hard, level floor (tile, wood, concrete). Avoid rugs. | | 0.0 flashes | Scale cannot find a stable zero point. | Check if something is stuck under the glass. Clean the feet. Turn off and retry. | | OLED/Display fade | Extreme temperature or dying battery. | Let scale return to room temperature (50-95°F / 10-35°C). Replace batteries. |
Wait for the display to show "0.0," then step onto the scale, ensuring each foot is centered on the stainless steel electrodes. taylor scale manual 5789f
A: This almost always means the scale is not on a hard, level surface. Place it on a tile or hard floor, not on a rug or carpet. | Error Code | Meaning | Solution |
Continue standing firmly on the electrodes. The upper screen area will show moving pattern bars ( "----" ) while calculating your cellular impedance data. | | Lo | Low battery
Taylor Precision Products warrants this scale against defects in materials or workmanship for . Does not cover battery, abuse, or exceeding weight limit. For service, contact Taylor Customer Service with model 5789F.