Unplug the STB and unscrew the outer chassis to access the motherboard.
No, not on the 4MB variant. The flash memory controller lacks the dual-bank architecture required for safe OTA. You must use wired USB or SPI.
Click Detect to find the chip, click Erase to wipe the corrupted code, open your clean 4MB .bin file, and press Write/Program . firmware evinix h-1 4mb
January 2025 Supported firmware versions: v2.3.2 (latest), v2.2.0 (legacy), v2.1.0 (critical update required)
Format a standard USB flash drive to the FAT32 filesystem on your computer. Unplug the STB and unscrew the outer chassis
For functional units that simply need a software upgrade to access new features, the built-in USB upgrade feature is the safest path forward. Prerequisites
: Downloading firmware from untrusted sources is a significant risk. Malware or corrupted files can permanently damage your Evinix H-1, turning it into a non-functional "brick". You must use wired USB or SPI
Yes, but with limitations. The Evinix H-1’s 4MB firmware is not encrypted. Using a tool like binwalk or a hex editor, you can extract the boot logo image (usually a 96x64 monochrome bitmap) and even replace it. You can also dump the existing firmware using the same Actions Burning Tool—look for the or "Dump" option before flashing.